CNC machining is an extremely common processing method used in the production of industrial equipment, and has been widely used in many companies. In the whole process of processing, the production is generally carried out according to the actual stainless steel plate parts, so in the production process, do you know the whole process of CNC machining? Here is a simple analysis for you, mainly divided into six processes.
1. Product positioning
Before producing and machining parts, companies analyze equipment. According to the product positioning of manufacturing, it is necessary to obtain a certain standard information content, which is also the processing requirements of parts, such as main parameters and important performance parameters.
2. Plane composition
The advertising design is reflected in the analysis of the equipment, including the shape and outline of the parts. According to the analysis and processing, the types of parts are clarified, and it is better to use drawing software for drawing.
3. Overall process plan
The whole process of processing different parts is different. Ningbo CNC machining can maintain a variety of processes. Fully considering the complex manufacturing requirements, in short, the storage capacity is a piece of equipment. This process is generally based on the material’s appearance design and processing regulations to analyze, and then estimate a reasonable processing flow.
4. Manufacturing process of CNC blade movement trajectory
In fact, this stage is based on the mobile application software to maintain the process, such as setting various basic manufacturing parameters, including the path of the sound CNC blade.
5. Path Simulation
After the path is transformed into a mobile application, it will be finally used in the solution. However, before the specific use, be sure to carry out simulation simulation. Path simulation can reduce the deviation that may be caused in the whole process of specific processing, or reduce the failure rate. Generally speaking, it is necessary to first check the expected target of the surface of the stainless steel sheet, such as small or wrong laser cutting, and scientifically research the overall process planning of the path.
6. Path output
Motion trajectory output is a key factor in the programming design of the machining core. According to the path output, the main high efficiency of the machining center can be maintained, which is also the main practical significance of CNC machining today.
Post time: Jan-08-2022